JET FAN CLASS SMOKE VENTING FAN

Sale Density: Avarage

• Jet Ventilation Systems are the combination of CO ventilation and smoke control in underground car parks.

APPLICATIONS:
• Available with uni-directional as well as fully-reversible impellers of diameters 300, 315, 355 and 370mm, providing almost the same thrust performance in either direction.

INSULATED CASING CLASS SMOKE VENTING FAN

Sale Density: Average

• Available in 5 sizes and 20 models, SVF-622 Smoke Venting Fan's range covers flow rates from 600 to 50,000 m³/hr.
• Suitable and recommended for applications in professional kitchens or for the extraction of polluted air (car parks, industry, etc.)

APPLICATIONS:
• Smoke extraction units meeting legislative requirements for the extraction of smoke and hot gases in the event of fire in high rise buildings and public assembly buildings.
• Range also designed for the extraction of contaminated air from industrial premises, professional kitchens and car parks, etc...
• Approved by the CTICM and covered by the CE certificate for smoke and heat extractor fans in compliance with standard NF EN 12101-3.
• Can be installed indoors or outdoors.

ROOF CLASS SMOKE VENTING FAN

Sale Density: High

• Roof exhaust unit with horizontal (THF) or vertical (TVFC - vertical discharge by means of directional hood) for smoke extraction (400°C/2h).
• Elegant and solid design.
• Overall minimal dimensions due to the unidirectional vertical exhaust hood.
• Certified for working at 400°C/2h.
• Service switch integrated in standard delivery.
• Optional – the possibility of connecting external controllers.
• Optional - folding out kit for maintenance.
• Adjustable air flows by means of frequency inverters or transformers.

APPLICATIONS:
• Exhausting air from large kitchens.
• Fire exhaust systems in both residential and office buildings.
• Ventialtion in tertiary and industrial premises.

EX-PROOF KITCHEN TYPE ROOF EXHAUST FAN

Sale Density: Low

• Explosion-proof vertical discharge roof exhaust fan.
• Suitable for industrial kitchens and exhausting flammable or explosive gases.

APPLICATIONS:
• Standard.
• Kitchen.
• Exhausting flammable or explosive gases.
• Hazardous Zone-0: Cannot be used.
• Hazardous Zone-1: Ex-II 2G c II-B T4.
• Hazardous Zone-2: Ex-II 3G c II-B T4.

DUCT TYPE MK.I AXIAL FAN

Sale Density: High

• Cased axial fans used for large air capacities with relatively low pressures are required in duct mounted applications.

APPLICATIONS:
• Suitable when large air capacities with relatively low pressures are required in duct mounted applications.
• For instance: ventilation and conditioning in naval and mining applications, evaporative towers, heat exchangers, cooling of electric and refrigerating equipments, etc...
• With this line is possible to attain higher pressures using the multistage version consisting of two single stages fans mounted in series, with counter-rotating impellers. This solution allows the recovery of the air rotative component turning it in pressure, developing up to 2.7 times the pressure of a single fan having the same geometry and speed.

DUCT TYPE MK.II AXIAL FAN

Sale Density: Avarage

• Cased axial fans used for large air capacities with relatively low pressures are required in duct mounted applications.

APPLICATIONS:
• Suitable when large air capacities with relatively low pressures are required in duct mounted applications.
• For instance: ventilation and conditioning in naval and mining applications, evaporative towers, heat exchangers, cooling of electric and refrigerating equipments, etc...
• With this line is possible to attain higher pressures using the multistage version consisting of two single stages fans mounted in series, with counter-rotating impellers. This solution allows the recovery of the air rotative component turning it in pressure, developing up to 2.7 times the pressure of a single fan having the same geometry and speed.