Square Ceiling Diffusers

Sale Density: Very High

• Standard Material: Aluminum profile. Usable for both supply and return air ducts.
• Direction of discharge can be selected to meet the requirements of room with 1 to 4 ways. Supply air can be oriented to vertically by blades of 1,2,3,4 of directions.
• Depending on architectural demands, can be manufactured in rectangular shape.
• Usable for places up to 2,6 - 4m. height.
• Has two models: Z-Bladed Model (SCD-120) and Curvilinear Bladed Model (SCD-220).
• On request, damper can be added to control flowing air volume.
• Standard frame: Grilles with 22mm or 32mm.
• According to 400, 600, 750, 900 blade angles, maximum effect range is 1m to 20m.
• Mounted with 4 mm screws on frame. Optional: Clips or Plate-spring applications. Special: Clip-in or Tile-cladding applications by special production procedures.
• Eloxal, anodizing or electrostatic powder coating with the color from RAL catalogue.

Circular Ceiling Diffusers

Sale Density: High

• Standard Material: Aluminum profile. Usable for both supply and return air ducts.
• The circular design guarantees a uniform radial discharge of supply air application.
• Usable for places up to 4m. height.
• Has three models: Standard Model (CCD-121), Curvilinear Bladed Model (CCD-221) and Telescopic Model (CCD-321).
• On request, damper can be added to control flowing air volume.
• Mounted with 4 mm screws on frame. Optional: Clips or Plate-spring applications.
• Eloxal, anodizing or electrostatic powder coating with the color from RAL catalogue.

Disc Valves

Sale Density: Avarage

• Standard Material: Aluminum profile. Optional: Galvanic sheet.
• Usable for both return and supply air ducts. Used in kitchens and bathrooms, generally.
• Has two types: Short Spigot (DV-122: Suitable for box connection) and Long Spigot (DV-222: Suitable for direct flex connection).
• Suitable design for high air speed and noise.
• Blind-frame mounted to the wall with 4 mm screws. Disc assembles with the frame by manual rotation.
• Eloxal, anodizing or electrostatic powder coating with the color from RAL catalogue.

Slot Diffusers

Sale Density: Avarage

• Standard Material: Aluminum profile. Usable for both supply and return air ducts.
• Suitable for high ceiling applications. Used for supplying cooled and heated air in facilities such as sport halls, atriums, offices, factories where air is to be discharged from high ceilings.
• Available in 1 to 4 slot configuration. Designed for mounting in the ceilings and sidewalls.
• Vertical, horizontal and inclined air discharge can be done by rotating the blades.
• On request, damper can be added to control flowing air volume.
• Air flow can be directed with a wide angle of 180° by adjusting the blades.
• Blades can be made of plastic. This application is more economical than standard product.
• Has four models: Standard Slot Diffuser (SD-123), Non-Blade Slot Difuser (SD-223), Roller Type Slot Diffuser (SD-323) and Frameless Slot Diffuser (SD-423).
• Also, stylish-looking / aesthetic models of roller type diffusers are available.
• Decorative design is suitable for mounting subsequent / continuous lines of slot diffusers.
• Mounted with 4 mm screws to the additional bridge in the mounting blind-frame.
• Eloxal, anodizing or electrostatic powder coating with the color from RAL catalogue.

SWIRL DIFFUSERS

Sale Density: High

• Used for supply and return air ducts.
• This diffusers are ideal for the application of suspending ceiling with rock wool.
• Can be used between 2,6 to 4 meters height.
• Adjustable blades can be black or White.
• Depending an architetural demands the face can be circular or square.
• Accessories; Plenum box, Lapel for volume control.
• Material; Aluminum is standart and stainless steel are optional.
• Finishing; Electrostatic powder coating with the colour from RAL catalogue.

TURBULANCE DIFFUSERS

Sale Density: Avarage

• Standard Material: 1mm DKP sheet. Optional: Aluminum or stainless steel sheets.
• Used for faster air diffusion in wide indoor areas. Usable for supply and return air ducts.
• Diffusion of fresh air occurs faster than any other diffusers, because of vortex-type air flow.
• Suitable for applications between 2,6 to 4 meters height.
• Has two models: Standard model(TWD-126), Improved model (TWD-226).
• Electrostatic powder coating with the color from RAL catalogue.

HIGH EXPOSURE DIFFUSERS

Sale Density: Average

• Standard Material: 1mm DKP sheet.
• Usable for supply air ducts.
• Designed for comfort and industrial applications.
• Suitable for applications up to 3,5 meters height.
• Has two models: Fixed-Bladed (HED-127) and Adjustable-Bladed (HED-227).
• Blade positions can either be adjusted by manually or servomotor between 30º and 90º. According to this angle maximum diffusion depth is from 1m to 20m.
• Electrostatic powder coating(oven-drying) with the colour from RAL catalogue.

JET NOZZLES

Sale Density: High

• Adjustable chasis and special frame are made of aluminum material by coating.
• Provides a long throw (up to 25 meters) at high velocities. Usable for pointwise heating/cooling in wide and high-ceiling rooms.
• Has a flow rate of 2000m3/h (max), suitable for up to 8m. heights.
• Air thrower ball can be adjusted with 30º angle.
• Has two main types: Single Walled Jet Nozzle (JN-125) and Double Walled Jet Nozzle (JN-225).
• On request, can be manufactured as “Multi-Nozzle Assembly”(as 4-6-8-... nozzles).
• Assembles with round duct connector, direct duct connection or flexible duct connector, by flanges, screws or rivets.
• Eloxal, anodizing or electrostatic powder coating with the color from RAL catalogue.

DRUM DIFFUSER

Sale Density: Low

• Standard Material: Aluminum profile (all parts).
• Cylendirical chasis provides many advantages: Low pressure loss, quiet operation, long distance throw and perfect air spread in wide indoor areas.
• Air flow can be directed by cylinderical chasis with rotation of +/- 30º degrees, to downwards and upwards.
• Mounted with 4mm screws to rectangular ducts, with adapter parts to round ducts.
• Eloxal, anodizing or electrostatic powder coating with the color from RAL catalogue.

IDEAL COMFORT DIFFUSER

Sale Density: Low

• Standard Material: 1mm DKP sheet.
• Ensures greater control in heating and cooling application.
• Pressure loss and noise level are kept steady when air flow direction is changed. Able to servo-motor activation.
• Able to providing vertical or horizantal air flow according to cooled/heated air behaivor; In cooling process, air flow diffuses from lateral outlets, in heating, it diffuses from bottom outlets.
• Suitable for applications between 4-15 meters height.
• Electrostatic powder coating(oven-drying) with the color from RAL catalogue.

CIRCULAR FLOOR DIFFUSERS

Sale Density: Average

• Standard material: Steel Sheet (all parts).
• Designed specifically for floor installation within raised floor systems, common to modern commercial buildings.
• Projection data were determined in a room with ceiling height of 2,7m. and 50C differential between supply air and average occupied zone temperature. Tests conducted with dirt basket/damper installed. Pressure loss values are calculated with fully opened damper.
• Has two models: Standard Model (CFD-130) and Improved Model (CFD-230).
• Electrostatic powder coating with the color from RAL catalogue.