Plated Wall Type Axial Fan

Sale Density: High

• Standard axial wall fan for general use.

APPLICATIONS:
• Suitable for the ventilation of industrial stock farms, greenhouses, garages, gymnasiums, car parks.

PLATED WALL TYPE AXIAL FAN WITH IEC-MOTOR

Sale Density: Very High

• Plate mounted axial fans with IEC-motor.
• The range consists of 9 sizes with impeller diameter from 250 up to 700 mm.

APPLICATIONS:
• Designed for installations requiring large capacities with low pressures, in applications for wall or panel mounting.
• Ventilation of commercial and industrial buildings, carparks, stock farms, cooling of electric and refrigerating equipments, etc...

PLATED WALL TYPE AXIAL FAN WITH COMPACT MOTOR

Sale Density: High

• Plate mounted axial fan with compact motor.
• The range consists of 8 sizes with impeller diameter from 300 up to 700 mm.

APPLICATIONS:
• Ideal for large capacities with lowpressures, in applications for wall or panel mounting.
• Ventilation of industrial and commercial buildings, car parks, stockfarms, or in the cooling of electric and refrigerating equipments, etc...

LOW AIR FLOW, WALL TYPE AXIAL FAN

Sale Density: Avarage

• Wall mounted axial fan.

APPLICATIONS:
• Suitable for medium and small volumes.
• Used in public premises, warehouses, industrial units.

SPEED-CONTROLLED, WALL TYPE AXIAL FAN

Sale Density: Avarage

Wall mounted axial fan.

APPLICATIONS:
• Combined supply and extract ventilation systems of premises for different destinations, where a high air flow capacity. are required at relatively low resistance of the system.
• Application in the motors of ball bearings provides a long servicelife (40.000 hours).
• Can be used for the direct ejection of the exhaust air or static suction head ventilation in fire-prevention ventilation systems.
• Air flow direction: from impeller to motor (rotation direction cannot be changed).
• Installation: built-in all directions.

DUCT TYPE MK.I AXIAL FAN

Sale Density: High

• Cased axial fans used for large air capacities with relatively low pressures are required in duct mounted applications.

APPLICATIONS:
• Suitable when large air capacities with relatively low pressures are required in duct mounted applications.
• For instance: ventilation and conditioning in naval and mining applications, evaporative towers, heat exchangers, cooling of electric and refrigerating equipments, etc...
• With this line is possible to attain higher pressures using the multistage version consisting of two single stages fans mounted in series, with counter-rotating impellers. This solution allows the recovery of the air rotative component turning it in pressure, developing up to 2.7 times the pressure of a single fan having the same geometry and speed.

DUCT TYPE MK.II AXIAL FAN

Sale Density: Avarage

• Cased axial fans used for large air capacities with relatively low pressures are required in duct mounted applications.

APPLICATIONS:
• Suitable when large air capacities with relatively low pressures are required in duct mounted applications.
• For instance: ventilation and conditioning in naval and mining applications, evaporative towers, heat exchangers, cooling of electric and refrigerating equipments, etc...
• With this line is possible to attain higher pressures using the multistage version consisting of two single stages fans mounted in series, with counter-rotating impellers. This solution allows the recovery of the air rotative component turning it in pressure, developing up to 2.7 times the pressure of a single fan having the same geometry and speed.